What 205/60R16 means
The inputs are 205 mm nominal section width, a 60-percent aspect ratio, and a 16-inch nominal rim diameter. The R identifies radial construction. The width is not a wheel-width measurement, and the rim number is not the outside diameter of the tire.
Nominal sidewall height is 205 × 60 ÷ 100 = 123 mm. Adding two sidewalls to the 406.4 mm rim gives 652.4 mm (25.69 in) of nominal outside diameter.
A calculated reference
Against 205/55R16, the unchanged width and rim let you trace the whole 20.5 mm diameter increase to the aspect ratio. The result describes a mathematical change and does not specify an acceptable replacement range.
Using a perfect-circle model, circumference is 2049.58 mm, equivalent to 487.91 revolutions per kilometer or 785.21 per mile. These are derived from unrounded diameter; actual rolling circumference also depends on the product and operating conditions.
Source and scope
General Tire’s AltiMAX RT45 source includes 205/60R16, article 15576180000. It was checked on October 27, 2026. That record verifies the published marking used here; it does not turn these calculated dimensions into that product’s measured specification or establish availability.
Use the exact product and vehicle requirements for load and speed ratings, permitted rim dimensions, inflation and clearance. Nominal geometry alone cannot verify fitment, braking behavior, handling or safety.
Sources and further reading
- AltiMAX RT45 — General Tire
- Tire Markings Explained — Michelin
- Tire glossary — Michelin